WIRE MESH PARTITIONS

Limited Quantities Left
We have over 50 panels and Sorry - SOLD Out of Gates (40 - 3' wide slide gates) in stock. New stock. Metallic Gray in color.

All panels 8' high and vary in width from 2' to 5'.
 ALL READY TO GO!

email charlie@unitedfence.com for special pricing or make an offer.

SPECIFICATIONS Standard Type 135   A.) Wire mesh partition shall be Standard Wire & Works type No. 135 size group S. B.) 10 gauge (.135) steel wire, woven into 1 1/2" diamond mesh, with wire securely    clinched to framing. C.) Wire shall be woven through a horizontal 1" x 1/2" x 12 Ga. channel bar at 3' - 6 1/8"  from bottom of partition. D.) Vertical frames 1 1/4" x 5/8" "C" type, cold rolled channel. Horizontal frames 1" x 1/2" x 12 Ga. channel mortised and tenoned at intersections. E.) Top capping bar 2 1/2" x 3/4" cold rolled channel with 1/4" "U" bolts approximately 14" O.C.  F.) Corner post 1 1/4" x 1 1/4" x 1/8" angle. G.) Cast iron floor shoes 1 1/2" high with set screw adjustment. H.) Door Frames 1 1/4" x 1/2" x 12 Ga. channel with 1 1/4" x 1/8" cover plate on four sides. I.) Sliding doors to have: Two, 4-wheel ballbearing trucks hung in enclosed box track hung in enclosed box track; cast iron door strike keeper; bottom guide channel. J.) Hinged doors to have: 1 1/2 pair fast pin butts: continuous 1 3/8" x 7/8" x 1/8" angle      strike. K.) 3" sweep space under all panels and doors. L.) Aluminum  cylinder mortise type locks with cylinders individually keyed, keyed alike, or master keyed to the building systems. All locks to have recessed knob on inside (bronze cylinder mortise type locks can be special ordered). M.) All hardware necessary for proper installation to be furnished. N.) Finish: one shop coat steel gray gloss enamel (or specify other color if desired).

Call Charlie or Ed for personal service at 781-826-9655